|
Miata
Install |
|
 |
1. Mazda did not paint the seat pans. You will find surface rust, this should be corrected. |
 |
2. After removing the old hog-rings
from the edges you can lift and separate the foam (with upholstery attached) from the metal seat pan. |
|
|
3. You will need to spray the inside and outside. |
|
|
4. 'Rust Converter' spray was used to neutralize the rust, converting it to primer. |
 |
5. Here I painted the pans gloss Black... |
 |
6. Bob painted his pans Silver... |
 |
7. I now paint the pans
White: a) the rust converter makes rust Black, it is hard to see a missed spot if using Black paint. b) the clean steel is shiny silver, it is hard to see a missed spot if using Silver paint. Paint the pans White. Easy to see any missed spots. |
|
|